1300 554 685

Uni-Mig 25 KVA Pneumatic Pedestal Spot Welder (Italian Made) (4648)


Availability: Limited Stock

RRP $8,699.00

$6,499.00

Be the first to review this product

Quick Overview
Air operated Three Phase 25KVA Pedestal Spot welder

$6,499.00

5 Customer have purchased this product

Product Details

ABOUT THIS MACHINE
Tecna has long been considered the international leader in Spot Welding. Tena's range of Pedestal Spot Welders are Italian made to the highest quality standards and are serviced and distributed in Australia by the highly regarding UniMIg team. Tena's range of Spot Welders can all be customised to ensure maximum efficiency and reliability.


- The new stationary ergonomic frame designed by TECNA helps to facilitate the operator's work.
- The control unit has been positioned frontally to allow the operator to view the welding data even during the working cycle.


FEATURES
- Arms adjustable in length allowing a better working flexibility.
- Chrome-copper electrode-holders for long life and heavy duty service, designed for straight and angled fitting.
- Adjustable electrode stroke.
- Epoxy resin coated transformer.
- Water-cooled transformer, arms and electrodes.
- Microprocessor control unit TECNA TE90.
- The air operated lubrication free cylinder eliminates oil mist.
- Electrode force adjustment with air filter reducer with gauge.
- Semi-automatic drainage system.
- Electrode speed control valves, shock absorber for cylinder's end of stroke and air discharge silencers.
- Two-stage electric foot pedal, that besides its normal use in automatic and single spot mode, allows the operator to bring the pieces together and to weld them only when correctly positioned.
- Pre-arrangement for the connection of a second electric two-stage foot pedal item 70284.
- The addition of the second foot pedal allows to recall two different adjustments of time- current. This function is helpful when different kinds of welding are to be performed on the same piece.

SPECIFICATIONS
ITEM 4648
Nominal power at 50% kVA 25
Maximum welding power kVA 68
No load secondary voltage V 4.6
maximum short circuit current kA 18
Maximum welding current on steel kA 14.4
Thermal current 100% A 3800
Supply voltage 50Hz * V 400
Cables section L=10 m mm2 16
Cables section L=30 m mm2 16
Delayed fuses A 50
Min. electrodes throat depth mm 230
Max. electrode force (6 bar) daN 240
Electrode stroke mm 8-44
Max. electrodes throat depth mm 550
Max. electrode force (6 bar) daN 115
Electrode stroke mm 15-85
Short circuit current with L max. kA 13
Arms diameter mm 40
Electrode-holders diameter mm 22
Standard electrodes cone diameter mm 14.8
Compressed air supply bar 6.5
Air for 1000 spots (6 bar) Nm3 4.3
Water cooling l/min 3.7
Aerial noise produced dB(A) < 70
Measure conditions
working stroke mm 20
welding time cycles 14
welding current kA 13.5
working rating in welds/min 10
Net weight (approximately) kg 143

Specifications

Additional Information

Weight No
Product Manual 4640_4644INFO.pdf
Product Brochure TECNAPNEUMATICINFO.pdf
Unit Type N/A
Part Number 4648
Primary Input Voltage N/A
Welding Current N/A
Voltage Steps N/A
Duty Cycle 40 Deg C N/A
Welding Voltage Range DC N/A
Overload Protection N/A
Reverse Polarity N/A
Wire Spool Size (kg) N/A
Wire Size (mm) N/A
Dimensions (mm) N/A
Weight (kg) N/A
Input Power N/A
Warranty Stamps
Embed Code No
Embed Code No
Embed Code No
Embed Code No
Embed Code No
Item Height N/A
Item Width N/A
Item Length N/A
Item Weight N/A
Item Height N/A
Item Width N/A
Item Length N/A
Item Weight N/A

Reviews

Write Your Own Review

You're reviewing: Uni-Mig 25 KVA Pneumatic Pedestal Spot Welder (Italian Made) (4648)

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Value
Price

Product Manual

Q&A

 

Product Faqs

Ask a Question

No Faqs Found !