1300 554 685

Lotos 200amp AC/DC TIG-MMA Square Wave Inverter with Foot Pedal


Availability: Limited Stock

RRP $1,149.00

$849.00

Quick Overview
LOTOS TIG200 200Amp AC/DC Square Wave Inverter Aluminum Tig/Stick Welder with Pedal
2

Product Details

Key information:

See specifications for full details
  
Warranty12 Months
Max Output200amps
ProcessesAC TIG, DC TIG, Stick
WeldsAluminium, Steel, Stainless, Cast Iron
Plug Type15amp
Weight (approx)26kg
Approx Weld Capacity Steel10mm
Input Power240v-Single Phase
Gas/GaslessN/A
Current AC (Alternating Current) & DC (DIrect Current)
  
ABOUT LOTOS
- More than 35,000 units sold in US in 2014
- Stocked by Walmart and other department stores

ABOUT THE MACHINE
The Lotos AC/DC TIG 200 Inverter has taken the US market by storm because of its super competitive price point and proven performance.

Its square-wave inverter enables accurate welding of fine aluminium using the Alternating Current (AC) feature. with 10-200amp output range, the machine is capable of welding anything from fine aluminium plates through to industrial plates up to 8mm. Foot control allows amps to be controlled using the foot pedal and the high quality inverter power source product a super clean welding arc.

DC-mode means the Lotos TIG 200 is also capable of producing high quality weld on steel, stainless steel, copper and other metals.
Lotos has an Australia service warehouse in Melbourne and carries a full range of spare parts which can be purchased through eWelders. The TIG200 comes with a full 12 month warranty.

FEATURES
- Automatic Dual Voltage (110VAC/220VAC),
- Dual Frequency ( 50Hz/60Hz )
- Input Voltage: 110~220 VAC (Auto Detected-NO Switch is necessary)
- Square-wave inverter for accurate aluminum welding
- Both HF start hand torch control and precise foot pedal welding heat control
- Housing Protection Grade: IP21
- Certification: CE, CCC, CSA and ISO-9001
- ETL Approved

SPECIFICATIONS
- Output Power AC/DC
- Input Voltages 230V ± 15%, 1-PH, 50/60Hz
- input Current -TIG 23.9A, MMA 36A
- Output Current TIG: 10 – 190A AC/DC Stick: - 30 – 185A AC/DC
- Power Factor 0.73
- Power Efficiency 80%
- Duty cycle @ 40°C (104°F) 60% @190A, - 240V 100% @150A, 240V-
- Dimensions with handle 28” (711mm) L 13” (330mm) W 17” (432mm) H
- Weight w/ 8'11’’ (2.7 m) torch 58lbs ( 26.3kg)
- Gas Supply Clean, dry, oil-free argon
- Recommended gas inlet flow rate / pressure 3.6scfm @65psi
- Input power cable length 6’ (1.8m)
- MATERIAL* Mild Steel, Stainless Steel, Aluminum, Other Metals
- WARRANTY 1 Year Warranty Included

Specifications

Additional Information

Input Power 240v-Single Phase
Part Number TIG200
Manufacturer No
Input Voltage 230V ± 15%, 1-PH, 50/60Hz
Rated Output Current TIG: 10 – 190A AC/DC Stick: - 30 – 185A AC/DC
Duty Cycle @ 40°C (104°F) 60% @190A, - 240V 100% @150A, 240V
Recommended Air Inlet Flow Rate Recommended Air Inlet Flow Rate
Air Compressor Pressure No
Max Cutting Thickness (mm) No
Weight (kg) 26kg
Weight 26.0000
Dimensions (mm) 711X33X432
Warranty Stamps
Embed Code
Embed Code
Embed Code No
Embed Code No
Embed Code No
Item Height N/A
Item Width N/A
Item Length N/A
Item Weight N/A
Item Height N/A
Item Width N/A
Item Length N/A
Item Weight N/A

Reviews

Good resultsReview by Nick Bowen
Bought this machine in October and am satisfied so far. Set-up was pretty simple, following the set-up video provided by this site. Control of the parameters is very easy and the torch is good quality. I've been able to achieve some good solid welds on aluminium plates of 2-3mm. The foot control is pretty basic but to be honest I expected this given the price of this unit and I'm not complaining. This machine doesn't have feature like pulse and pre-gas but that was fine for me as I'm not welding super thing stuff. I just wanted a good, cheap and reliable ACDC TIG welder for aluminium and this is it. Thanks eWelders and Lotos (Posted on 3/02/16)
HappyReview by Tom
A mate of mine in Perth had bought one of these and recommended it and given the price I couldn't go past it. It's provide to be a really good decision so far. Bought it in November and have used it to make an aluminium boat platform, welding mainly 2-3mm ally plates, without and issues at all. The set-up video on this site was very helpful. The foot pedal is pretty basic but does the job i guess. Thanks to the eWelders guys for fast delivery and service. (Posted on 14/01/16)

Write Your Own Review

You're reviewing: Lotos 200amp AC/DC TIG-MMA Square Wave Inverter with Foot Pedal

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Value
Price

Product Manual

This product doesn't have any product manual yet

Q&A

 

Product Faqs

Ask a Question

No Faqs Found !

From ACDC TIG Welder - Single Phase, KYM Recommends: