1300 554 685

Boswell 40amp Inverter Plasma Cutting Companion


Availability: Only 3 Left

RRP $799.00

$599.00

Quick Overview
Ultra-lightweight, Industrial-powered 40amp plasma cutter. Exceptional Duty Cycle. 16mm steel cuts.

$599.00

152 Customer have purchased this product
This machine is contained in the following value bundles
4

Product Details

ABOUT
The Boswell Inverter Cutting Companion is arguably the best value machine in the highly competitive Australian single-phase, 40amp plasma cutting market.

With an exception 60% duty cycle at 40A and an ability to make up to 16mm mild steel severance cuts and 12mm quality cuts, this machine is capable of handling an industrial level work-load but fits well into the DIY price bracket. The Inverter-based power source, allows for smooth, stable cuts, and the high quality plasma torch further enhances results.

Recent adjustments have seen the machine fitted with Pilot Arc Start technology allowing you to cut through paint and rust if need be. The machines has also been fitted a rugged-design ABS plastic-case making it extremely robust. The machine is ultra-lighteight at 8.2kg giving it exceptional portability and is ideally suited to sheet metal work.

Boswell's team is based here in Australia and all of its machines are rigorously tested and Australian C-Tick Standard compliant.

Why is this machine so much cheaper than its competitors you may ask? Simple, Boswell's lean but highly professional team does not have the overheads of its major competitors allowing it to sell at excellent wholesale rates. eWelders believes in passing on those savings to you.

FEATURES
- New Pilot Arc Start (cut through rust and paint)
- Post Flow Time Function
- Exceptional 60% Duty Cycle at 40A
- Single-Phase 240v Inverter Technology
- Heavy Duty ABS Plastic Case
- 16mm mild steel cutting capacity
-12 Months Warranty
- Smoothcut modern Inverter Technology
- Australian C-Tick Compliant
- Exceptional potability (8.2kg)

YOUR PACKAGE
- Inverter Cut 40R PLasma Cutter Power Source
- High-quality Pt31 Plasma Torch and Cables
- Earth Clamp and Cable
- Air Regulator and Fitting
- Air Hose
- Standard Cut Consumables (5 x tips, 5 x electrodes, 2x ceramic swirl rings, 2 x ceramic cups)

Specifications

Additional Information

Input Power No
Part Number CUT40RO1
Manufacturer Boswell
Input Voltage 1Phase AC 240V 15A Plus
Frequency 50/60Hz
Rated Input Current 30
Rated Power (KVA) 6.6
No Load Voltage 230
Welding Current 20-40A
Rated Output Current 96V
Duty Cycle 60% @ 40A
Efficiency 80%
Power Factor 0.73
insulation_grade F
Arc Initiation Way HF
Air Compressor Pressure 4-4.5
Max Cutting Thickness (mm) 1-16
Weight 8.2000
Dimensions (mm) 430 x 185 x 306
Warranty Stamps
Embed Code No
Embed Code No
Embed Code No
Embed Code No
Embed Code No
Item Height N/A
Item Width N/A
Item Length N/A
Item Weight N/A
Item Height N/A
Item Width N/A
Item Length N/A
Item Weight N/A

Reviews

Excellent so far. Review by Dman
I bought this plasma cutter 6 months ago. The pilot arc does not blow flames like most expect but seems to work really well regardless on rusty or painted surfaces. The machine cuts well and consumables are cheap and plentyful. Not great on anything thicker then 10mm in my opinion. Def worth the money for hobbiest. Would buy it again. Cust service was very good too. (Posted on 17/07/16)
Fantastic ValueReview by Alex Hamilton
I'm really happy I purchased this machine. Very easy to set-up and use. Very high quality cuts and the duty cycle is vastly superior to any of the other products I considered. Five Stars from me for sure. High recommend (Posted on 30/04/15)
Good value for moneyReview by Peter
I purchased one of these plasmas a couple of months ago mainly for sheet metal. If cuts through thin sheets really clean and can be used for up to 2 or 3 hours pretty hard with out over heating issues.
The amp controls and post flow function are both easy to use and there's no gremlins with this machine in terms of setting it up to use straight away.
I've made 10 to 11mm cuts and been happy with how clean the cuts are. Anything over that gets a little rough but I've made a couple of 15mm severance cuts so the machine can hit the cutting capacity's advertised. (Posted on 19/02/15)
Cuts like a dreamReview by Ginger-beer
Recently bought machine. Was slightly wary as I hadn't heard much about the brand but it cuts like an absolute dream and is already paying itself off. So far I definitely recommend it. (Posted on 23/01/15)

Write Your Own Review

You're reviewing: Boswell 40amp Inverter Plasma Cutting Companion

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Value
Price

Product Manual

This product doesn't have any product manual yet

Q&A

 

Product Faqs

Ask a Question

No Faqs Found !

From Single Phase Plasma Cutter, KYM Recommends:

Add any Accessories and we will ship them for FREE